Czech stove manufacturer
+420 491 422 647
← Back to advice and tips
8 November 2026

The most common mistakes when using a wood-burning stove

Smouldering, overfiring, damp wood or coal in a wood-burning stove. Mistakes that shorten a stove’s life, and how to avoid them.

The most common mistakes when using a wood-burning stove

Most complaints about a “stove that doesn’t burn properly” have nothing to do with the stove itself, but with how it is used. Here are the mistakes we come across most often.

1. Burning damp wood

Wood with a moisture content above 20% burns badly, smokes, hisses and produces tar. The glass blackens in no time and the chimney gets clogged. There is only one solution: dry wood (here’s how).

2. Smouldering

When a stove is too powerful for the room, people close the air so it doesn’t overheat. The fire is starved, burns incompletely and tar builds up in the stove, flue pipe and chimney. It’s better to add smaller loads and let the fire burn with the air more open.

3. Overfiring

The opposite extreme: a full firebox, the air wide open and a strong chimney draught. The stove is under more strain than it is built for – the grate, baffle or firebricks crack, and in extreme cases the firebox warps. Wood-burning stoves are mainly designed for intermittent use; you’ll find the fuel loads and air settings in the manual.

4. Unsuitable fuel

A wood-burning stove is not a coal boiler. Coal burns at higher temperatures than the stove is designed for. Varnished wood, chipboard or waste don’t belong in a stove at all.

5. Lighting the fire wrongly

Big logs right at the start, lighting from the bottom and turning down the air too early. We describe the right method in our article How to light a stove properly.

6. Underestimating chimney draught and air supply

Does the stove only burn well with a window open? It’s short of air – the solution is an external air supply. Does it smoke even with the air vents open? The chimney may be weak or clogged. Is the stove roaring away like a furnace? A draught stabiliser will help.

7. DIY installation

Connecting to the chimney, and especially to a central heating system, is a job for a professional. Incorrect connection is dangerous, and installation without a certificate can mean losing the warranty.

8. Neglected maintenance

A full ash pan, hardened seals and an unswept chimney. You’ll find what to check and when in our article Caring for and maintaining your stove.

Not sure? Write or call us – we’ll advise you straight from the factory. You’ll find our contact details here.

#Heating

More articles