Czech stove manufacturer
+420 491 422 647

Non-combustible boards in several formats, together with anchors and self-tapping screws to hold them firmly in place. The range is used to shield walls and structures around stoves and fireplace inserts from heat.

Chosen by installation firms and experienced DIYers who prepare the build themselves.

What to look for

Board size comes first. We offer 800x600, 900x600 and 1200x600 mm formats in a thickness of 5 mm, so the area behind the stove or the side of a recess can be covered with minimal cutting and few joints. Work out the area you need to protect and allow a little extra for overlaps.

The second thing is fixing. The 35x110 mm heat-resistant anchor for insulation boards holds the board in the structure, while self-tapping phosphated screws in lengths from 45 to 90 mm secure it to the load-bearing substrate. Choose the screw length according to the combined thickness of the board and the material you are fixing into.

Working with the boards

  • Level the substrate first – the board should not rest on single points.
  • Space anchors and screws evenly and keep a margin from the edges.
  • Make cuts and joints so that the boards butt together, leaving no through gaps.
  • Use offcuts for small areas of shielding behind the flue pipe.

What goes with them

Insulation boards are part of our building materials section, where you will find other items for finishing a fireplace surround. If you are unsure about the make-up of a particular structure, follow the installation instructions for your appliance and the specified clearances from combustible materials.