Components for warm-air distribution that carry heat from your fireplace insert to rooms beyond the main living area. Here you will find round and rectangular ducting, insulated versions, fittings, outlets, rosettes, fans with filters and speed controllers.
The range is designed for installers and stove fitters as well as experienced self-builders planning their own distribution system.
Warm-air distribution
106 products in this category.

Clamp Band
5.0 (4)
Aluminium duct 150mm/3bm

Aluminium Duct 100mm/3m
5.0 (1)
Aluminium duct 120mm/3bm
5.0 (1)
Aluminium Duct 80mm/3bm

Insulated aluminium duct 125mm/5m
5.0 (2)
Rectangular duct 100cm, channel

Insulated aluminium duct 100mm/5m
5.0 (1)
Aluminium duct 130mm/3 lm

Fireplace fan 400 with filter

Fireplace fan 520 with bypass and filter
4.0 (1)
Insulated Aluminium Ducting 125mm/10m
5.0 (1)
Fireplace fan 400 with bypass and filter

Rectangular Connector 150x50 mm
4.7 (3)
Fireplace fan 400

Fireplace fan 520

Duct damper 100mm, galvanised

Wall - ceiling bend, duct
4.7 (3)
Insulated aluminium duct 150mm/5m

Insulating sleeve 150x50/10m

Connector 100mm, galvanised
5.0 (1)
Y-Branch 100mm, Galvanised
5.0 (2)
Aluminium Ducting 125mm/3m

Insulated aluminium ducting 150mm/10m
How to put the system together
The starting point is choosing the duct cross-section. Round ducting is easier to route and suits shafts and suspended ceilings, while rectangular ducting helps where there is little headroom. Where the route passes through an unheated space or is longer, insulated round ducting is worthwhile – the heat reaches the target room with less loss.
You then complete the route with parts from the Fittings, reducers, connectors subcategory, distribution boxes and outlets. At the end of each branch is a rosette to match your interior – in white or chrome and in standard diameters.
What to consider when choosing
- Length and number of bends: the shorter and straighter the route, the better the airflow.
- Keep the same diameter along the whole branch and use reducers only where necessary.
- Tighten joints firmly with clips and secure them with screw clamps.
- For longer or branched systems, choose a fan from the Fans, filters subcategory.
Control and operation
Fan output is managed by Speed controllers – surface-mounted or flush-mounted, in white or titanium, some with a temperature sensor. This means the system starts up only when the fire is lit and quietens down by itself once it goes out. Automatic combustion control with remote control is also available.
Warm-air distribution is the solution for homes where a fireplace insert is to heat several rooms. We design the parts to last and to be combined – and we give a five-year warranty on products from our own production.