Description
Fan with thermostat designed for the forced circulation of hot air. The thermostat switches on when the temperature of the air flowing through the unit reaches the set value and switches off when the temperature falls below it. The fan can also run continuously. A system of ducts with a rectangular or round cross-section allows hot air to be distributed over longer distances. The pressure created ensures that hot air is distributed to several rooms at once. The fan is designed for continuous operation at temperatures from +20 to +150 °C and can be connected to an automatic speed controller.
Intended use
The fan can be used to distribute hot air from a fireplace. In an air-conditioning system, it can also be used to extract excess hot air from an air-conditioned room. The fan can run for long periods without interruption.
Safety requirements
The fan must be installed by a qualified electrician in accordance with the applicable regulations. Maintenance and repairs may only be carried out after the fan has been disconnected from the mains. Before connecting the fan to the mains, make sure that the impeller and housing are not damaged and that there are no objects in the air passage of the housing.
When using the fan in warm-air heating systems, it is forbidden to:
- mount the fan on combustible material,
- cover the fan,
- build the fan into a wall,
- place the fan inside the fireplace hood.
Installation and connection
After unpacking the fan, check:
- the condition of the power leads (condition of the insulation),
- the condition of the fan housing (dents, deformation; the impeller must not touch the fan housing).
These checks are carried out to detect any damage that may have occurred during transport. If no damage is found, installation of the fan at its intended location can begin. The installation surface must be perfectly level. To reduce vibration, mount the fan on a mineral wool pad. Install the air duct system from the fan to the rooms to be heated. Use only insulated metal ducting (channels or insulated aluminium ducting). The distribution box must have access to air. The unit must not be operated in a dusty environment, for example during building work.
Fireplace fan 520
The fireplace fan carries warm air from the stove into a distribution system throughout the whole house. Model 520.
- mount the fan on combustible material,
- cover the fan,
- build the fan into a wall,
- place the fan inside the fireplace hood.
- the condition of the power leads (condition of the insulation),








