Description
Fan with thermostat for the forced circulation of hot air. The thermostat switches on when the temperature of the air flowing through the unit reaches the set value and switches off when the temperature falls below it. The fan can also run continuously.
A system of ducts with a rectangular or round cross-section allows hot air to be distributed over longer distances. The pressure generated distributes the hot air to several rooms at the same time. The fan is designed for continuous operation at temperatures from +20 to +150 °C. The fan can be connected to an automatic speed controller.
Intended use
The fan can be used to distribute hot air from a fireplace. In an air-conditioning system it also serves to extract excess hot air from the air-conditioned room. The fan can run for long periods without interruption.
Safety requirements
The fan must be installed by a qualified electrician in accordance with the applicable regulations. Maintenance and repairs may only be carried out after the fan has been disconnected from the mains. Before connecting the fan to the mains, make sure that the rotor and housing are undamaged and that there are no objects in the flow section of the housing.
When using the fan in warm-air heating systems, it is prohibited to:
- install the fan on a combustible material,
- cover the fan,
- build the fan into a wall,
- place the fan inside the fireplace hood.
Installing and connecting the fan
After unpacking the fan, check:
- the condition of the supply wires (condition of the insulation),
- the condition of the fan housing (bends, deformation – the rotor must not touch the fan housing).
These checks are carried out to detect any damage that may have occurred in transit. If no damage is found, the fan can be installed in its intended location. The installation surface must be perfectly level. To reduce vibration, mount the fan on a mineral wool pad.
Install the air duct system from the fan to the heated rooms. Use only insulated metal ducting (channels or insulated aluminium pipes). The distribution box must have access to air. The unit must not be operated in a dusty environment, for example during building work.
Fireplace fan 400
The fireplace fan distributes warm air from the stove into a ducting system throughout the house. Model 400.
- install the fan on a combustible material,
- cover the fan,
- build the fan into a wall,
- place the fan inside the fireplace hood.
- the condition of the supply wires (condition of the insulation),










