Description
Fan with a thermostat designed for the forced circulation of hot air. The thermostat switches on when the temperature of the air flowing through the unit reaches the set value and switches off when the temperature falls below the set value. The fan can also operate continuously. A system of ducts with a rectangular or round cross-section allows hot air to be distributed over longer distances. The pressure generated ensures that hot air is distributed to several rooms at the same time. The fan is designed for continuous operation at temperatures from +20 to +150 °C. The fan can be connected to an automatic speed controller.
Intended use
The fan can be used to distribute hot air from a fireplace. In air-conditioning systems, it can also be used to extract excess hot air from an air-conditioned room. The fan can operate for long periods without interruption.
Safety requirements
The fan must be installed by a qualified electrician in accordance with applicable regulations. Maintenance and repairs of the fan may only be carried out after disconnecting it from the mains. Before connecting the fan to the mains, make sure that the rotor and casing are not damaged and that there are no objects in the flow section of the casing.
When using the fan in warm-air heating systems, it is forbidden to:
- mount the fan on combustible material,
- cover the fan,
- build the fan into a wall,
- place the fan inside the fireplace hood.
Installing and connecting the fan
After unpacking the fan, check:
- the condition of the power leads (condition of the insulation),
- the condition of the fan casing (bends, deformation; the rotor must not touch the fan casing).
The above checks are carried out with regard to any damage that may have occurred during transport. If no damage is found, installation of the fan at its intended location can begin. The surface intended for installing the fan must be perfectly level. To reduce vibration, mount the fan on a mineral wool pad. Install the air duct system from the fan to the rooms to be heated. Use only insulated metal ducting (ducts or insulated aluminium pipes). The distributor must have an adequate air supply. The unit must not be operated in dusty environments, for example during building work.
Fireplace fan 540
The fireplace fan distributes warm air from the stove through the ducting system throughout the house. Model 540.
- mount the fan on combustible material,
- cover the fan,
- build the fan into a wall,
- place the fan inside the fireplace hood.
- the condition of the power leads (condition of the insulation),










