Materials for building and repairing fireplace surrounds, heat-storage bodies and fireboxes. Here you will find structural insulation boards, stove mortars and renders, heat-resistant adhesives, firebricks, glass-fibre mesh, inspection doors and fireplace mantels.
This category is for stove fitters, building firms and experienced stove owners finishing or renovating a surround themselves.
Building materials
74 products in this category.

Insulating and construction board SKAMOTEC 225 - 30 mm

CEMVIN non-combustible board 1200x600x5 mm

Insulation and Building Board SKAMOTEC 225 - 40 mm
5.0 (2)
SF repair kit 2× 500 × 300 × 30 mm
5.0 (17)
CEMVIN non-combustible board 800x600x5 mm

CEMVIN non-combustible board 900x600x5 mm

Universal adhesive 6 kg
4.5 (6)
Rudokit Adhesive NT 1350 2kg
5.0 (2)
SF repair kit 2× 500 × 300 × 25 mm
4.7 (12)
White Stove-Building Adhesive WHITE 600 - 20 kg
4.9 (6)
Insulation and Construction Board SKAMOTEC 225 - 50 mm

Insulation and Construction Board SKAMOTEC 225 - 25 mm
4.5 (2)
SILAPEN universal primer 1 l
4.8 (6)
SILCATEX-SE stove-builder's glass fibre mesh 1 lm
4.9 (8)
Refractory Masonry Mortar, ZKO 10kg
5.0 (5)
THERMAX ECO 1000x610x30 mm
5.0 (4)
SILAPEN universal primer 5 l
5.0 (1)
Firebrick mortar 25 Kg
4.9 (9)
Fireplace Inspection Door SILADOR - 30 × 40 cm - Vertical Installation

DOUBLETERM special stove-builder's plaster 20 kg
5.0 (2)
SF Repair Kit 2× 500 × 300 × 20 mm
5.0 (7)
Firebrick – Large
5.0 (3)
THERMAX ECO 1000x610x40 mm

Stove Plaster FINISH 5 kg
5.0 (1)How to choose materials for a fireplace surround
The basis is structural insulation boards, which bear loads while protecting surrounding structures from heat. Choose the board thickness according to the space between the insert and the surround; for stand-alone insulation, mineral wool insulation is a good choice. The boards are fixed with heat-resistant anchors and joined with an adhesive that can withstand the temperatures inside the surround.
Stove render then goes on the surface – a coarse coat for levelling and a finer finishing coat for a smooth look. Reinforce joints and transitions with glass-fibre mesh so the surface doesn't crack under thermal stress.
Firebox and repairs
Firebrick belongs in the firebox: firebrick slips and firebricks are laid with refractory mortar. Damaged linings or broken pieces can be fixed with firebox repair kits, which restore the firebox's shape and the thermal protection of the stove body.
What else you need on site
- Stove fitting supplies – fixings and ancillary materials for the surround
- Inspection doors – access to the flue pipe and chimney components, in versions for landscape or portrait installation
- Fireplace mantels – a visible finishing touch to the surround
When planning, bear in mind that the individual layers must build on each other and need time to cure. Carefully executed insulation and a well-ventilated surround will extend the life of your stove or insert and help keep the heat exactly where you want it.