Description
DOUBLETERM is a sophisticated stove plaster with a hydraulic binder and high heat resistance. It withstands temperatures of up to 200 °C and is suitable for both interior and exterior use. It can be joined without a visible transition, which makes repairs considerably easier, including repairs to old historic plaster structures.
Properties
- Contains a blend of several types of fibre which, in many cases, can replace mesh
- Serves as both a base layer for reinforcing mesh and a finishing layer in one
- A grain size of 0–0,5 mm provides a surface comparable to standard stucco plasters
- Can be used as a modelling plaster
- Very strong, abrasion-resistant surface
- Different application techniques allow a textured or perfectly smooth surface to be created
Substrate preparation
The substrate must be load-bearing, firm, free of efflorescence, sufficiently cured and free of grease, dust and dirt. The substrate temperature must not fall below 5 °C — do not apply DOUBLETERM at lower temperatures. For more absorbent substrates (such as calcium silicates and highly porous firebrick), we recommend priming with SILAPEN, a special primer for fireplaces and stoves. Carry out the test firing only once the surface has dried completely. The first firing must be gradual and gentle.
Nevertheless, we recommend using SILATERM stove reinforcing mesh.
Application
- Pour the dry mix into a bucket and first mix it dry.
- Use only drinking water, in a quantity of 0,34–0,38 l per 1 kg of mix.
- Mix at low speed for 3–5 minutes, leave to stand for 5 minutes and mix again.
- Do not add more water while mixing.
- Apply with a spatula or a rigid, inflexible plastic or stainless steel trowel in a layer of 1–50 mm.
- For a textured finish, float the partially set surface with a felt float.
- For a smooth finish, trowel the partially set plaster with a stainless steel trowel.
DOUBLETERM special stove-builder's plaster 20 kg
5.0 · 2 reviewsSpecial stove plaster with heat resistance up to 200 °C, suitable for interior and exterior use. It stands out for its ability to level unevenness of up to 50 mm without cracking, with a working time of 120 minutes.
- Contains a blend of several types of fibre which, in many cases, can replace mesh
- Serves as both a base layer for reinforcing mesh and a finishing layer in one
- A grain size of 0–0,5 mm provides a surface comparable to standard stucco plasters
- Can be used as a modelling plaster
- Very strong, abrasion-resistant surface
Customer reviews
- rukodelnavyrobaVerified purchaseSource: Zboží.cz – verified purchase
- CustomerVerified purchaseSource: Zboží.cz – verified purchase
How we verify reviews
We only publish reviews from customers who actually bought the product. We verify them in three ways: through the Heureka Verified by Customers questionnaire, which Heureka sends to buyers after purchase; through Zboží.cz reviews, which Zboží.cz requests only from customers with a verified order; and, for reviews submitted directly with us, by matching them to an order number. We do not edit review texts in any way.












