Description
CEMVIN fibre cement boards are designed for a wide range of uses in construction and the electrical industry. They are used in residential, public, industrial and agricultural buildings for the external and internal cladding of timber, masonry and steel structures, for external and partition wall panels, suspended ceilings, floors, roof structures, permanent formwork, covers for floor and electrical distribution ducts, for non-combustible bases and partitions, and for other supplementary building elements and products that benefit from their favourable strength, thermal and fire-protection properties.
The boards are made of cement, limestone, cellulose pulp and synthetic fibres. They are safe for health and contain no asbestos or other harmful substances. They are produced in a standard natural light grey colour, the shade of which may vary between production batches. They are manufactured in accordance with ČSN EN 12467 – Fibre-cement flat sheets.
Installation
Fibre cement boards can be cut and worked in the usual ways – sawing, drilling and milling with carbide-tipped tools. Nails, wood screws and bolts are used to fix the boards.
When using wood screws and bolts, the boards must be fixed through pre-drilled holes because of the linear expansion of the boards when humidity changes. The diameter of the pre-drilled holes must be 1.5 times the diameter of the screw or bolt. Screws and bolts are tightened so that they do not deform the board or restrict linear movement. Use screws or bolts with a flat bearing surface under the head and a sufficient contact area.
Nails, countersunk screws and bolts may be used directly only where the ambient humidity does not change. The expansion joint between boards must be at least 6 mm.
The boards can be given surface finishes as recommended by manufacturers of coatings for fibre cement and wooden substrates. The boards can also be bonded to each other or to other surfaces – choose a suitable adhesive according to its manufacturer's recommendations. Until the adhesive has cured, the board must be firmly pressed mechanically against the bonded layer.
CEMVIN non-combustible board 1200x600x5 mm
CEMVIN non-combustible building board is used to clad walls and ceilings around stoves and chimneys. Dimensions 1200x600x5 mm.







