Czech stove manufacturer
+420 491 422 647
Home/Accessories/Warm-air distribution/Fans, filters/Fireplace fan 400 with filter

Description

A fan with a thermostat designed for the forced circulation of hot air. The thermostat switches on when the temperature of the air flowing through the unit reaches the set value and switches off when the temperature falls below the set value. The fan can also run continuously. A ducting system with a rectangular or round cross-section allows hot air to be distributed over longer distances. The pressure generated ensures that hot air is distributed to several rooms at the same time. The fan is designed for continuous operation at temperatures from +20 to +150 °C. The fan can be connected to an automatic speed controller.

Intended use

The fan can be used to distribute hot air from a fireplace. In an air-conditioning system, the unit can also be used to extract excess hot air from the air-conditioned room. The fan can operate for long periods without interruption.

Safety requirements

The fan must be installed by a qualified electrician in accordance with the applicable regulations. Maintenance and repairs may only be carried out after first disconnecting the unit from the mains. Before connecting it to the mains, make sure that the rotor and casing are not damaged and that there are no objects in the flow section of the casing.

When using the fan in warm-air heating systems, it is prohibited to:

  • mount the fan on combustible material,
  • cover the fan,
  • build the fan into a wall,
  • place the fan inside the fireplace hood.

Installation and connection

After unpacking the fan, check:

  • the condition of the power leads (condition of the insulation),
  • the condition of the fan casing (dents, deformation; the rotor must not touch the casing).

The above checks are carried out with regard to any damage that may have occurred during transport. If no damage has been found, installation of the fan at its intended location can begin. The surface intended for installation must be perfectly level. To reduce vibration, mount the fan on a mineral wool pad. Install the air ducting system from the fan to the rooms that are to be heated. Use only insulated metal ducting (ducts or insulated aluminium pipe). The distributor must have an assured air supply. The unit must not be operated in a dusty environment, e.g. during building work.

Fireplace fan 400 with filter

Code: HSF18-133

The fireplace fan distributes warm air from the stove into a ducting system throughout the house, with a filter. Model 400.

€377
incl. VAT
Delivery within 7 days
✓ Dispatched once restocked✓ 2 years warranty✓ Free advice
  • mount the fan on combustible material,
  • cover the fan,
  • build the fan into a wall,
  • place the fan inside the fireplace hood.
  • the condition of the power leads (condition of the insulation),

Downloads

Manufacturer

Parkanex

Frequently bought together

Similar products