Czech stove manufacturer
+420 491 422 647

Description

This galvanised 150/125 mm reducer serves as a connecting piece in warm-air ducting, for example when several rooms are heated by one heat source.

Remember when building a warm-air distribution system

  • The heat output of the fireplace or fireplace insert must always be sufficient for whether you will use the fireplace as your main heating or only as supplementary (background) heating.
  • There must be an adequate air supply to the room from which the ducts run and in which the fire burns in the fireplace insert.
  • Except in the very simplest warm-air distribution systems (e.g. warm air ducted only to the upper floor), a fan of the required capacity must be fitted in the system.
  • All warm-air outlets must be closable and, if possible, continuously adjustable, so that you can always heat only the spaces you want to heat.
  • If you blow air into a room, you must also make sure that the cooled air has a way to flow back. Slight overpressure is not a problem, but if the room is completely airtight (typically with uPVC windows and doors), it will be impossible to get the required amount of warm air into it.

Reducer 150/125mm, galvanised

Code: HSF18-073

This galvanised reducer narrows warm-air ducting from 150 mm to 125 mm; suitable for higher pressures in the ducting.

€12
incl. VAT
In stock
✓ Dispatched within 24 hours✓ 2 years warranty✓ Free advice
  • The heat output of the fireplace or fireplace insert must always be sufficient for whether you will use the fireplace as your main heating or only as supplementary (background) heating.
  • There must be an adequate air supply to the room from which the ducts run and in which the fire burns in the fireplace insert.
  • Except in the very simplest warm-air distribution systems (e.g. warm air ducted only to the upper floor), a fan of the required capacity must be fitted in the system.
  • All warm-air outlets must be closable and, if possible, continuously adjustable, so that you can always heat only the spaces you want to heat.
  • If you blow air into a room, you must also make sure that the cooled air has a way to flow back. Slight overpressure is not a problem, but if the room is completely airtight (typically with uPVC windows and doors), it will be impossible to get the required amount of warm air into it.

Drawings and dimensions

Downloads

Manufacturer

Parkanex

Frequently bought together

Similar products