Czech stove manufacturer
+420 491 422 647
← Back to advice and tips
9 November 2026

Clean stove glass: how airwash works and how to clean the glass

Why the glass on a good stove doesn’t blacken, what can still make it dirty and how to clean it safely so it lasts for years.

Clean stove glass: how airwash works and how to clean the glass

The view of the fire is why people buy a stove. Blackened glass spoils it. The good news: with a properly used stove with airwash, you only need to clean the glass now and then.

How airwash works

Part of the combustion air (secondary air) warms up in channels inside the stove and comes out through a slot above the glass. It flows down the inside of the glass like an invisible curtain that keeps smoke and soot away from it. At the same time it brings oxygen to the upper part of the firebox, where the wood gases finish burning.

On HS Flamingo stoves, the airwash is part of the Eko-Air-In air supply system, so it works even in airtight homes with heat recovery ventilation.

Why the glass still blackens

  • damp wood – the most common cause, more in our article Firewood;
  • air turned down too far – the fire is starved and the airwash doesn’t get enough air;
  • weak chimney draught;
  • an overfilled firebox or logs leaning against the glass;
  • primary air under the grate left open for long periods, which disrupts the airflow along the glass.

A single corner or the bottom edge getting dirty after lighting is normal – it should clear by itself once the fire is burning well.

How to clean the glass

  1. Only clean the glass when it is cold.
  2. Use a stove glass cleaner (available here) and a soft cloth, or the tried-and-tested trick: a damp paper towel dipped in fine ash, then wipe dry.
  3. Don’t use wire wool, abrasive sponges or harsh oven cleaners – they will scratch the glass or damage the seal.
  4. Don’t spray cleaner onto the rope seal around the glass.

Replace cracked or scratched glass with an original part – you’ll find replacement glass for our stoves in spare parts.

Not sure? Write or call us – we’ll advise you straight from the factory. You’ll find our contact details here.

#Heating#Maintenance

More articles