Czech stove manufacturer
+420 491 422 647

Flue pipes connect your stove or fireplace insert to the chimney. Here you will find pipes, elbows, adaptors and reducers, wall sleeves, caps, as well as warm-air heat exchangers and finned pipes that make use of the heat in the outgoing flue gases.

The range is designed for stove owners and heating engineers putting together a flue system tailored to a specific installation.

Home/Flue pipes

Flue pipes

28 products in this category.

Filters (active)
Elbow - adjustable UNI 160mm/2mm
4.9 (10)
More than 5 pcs in stock
€40
incl. VAT
Elbow - Adjustable 90° 160mm/2mm
5.0 (2)
In stock
€30
incl. VAT
Pipe 160mm/2mm/100cm
4.7 (3)
More than 5 pcs in stock
€34
incl. VAT
Pipe 160mm/2mm/50cm
5.0 (1)
More than 5 pcs in stock
€21
incl. VAT
Pipe 160mm/100cm/1.5mm
More than 5 pcs in stock
€31
incl. VAT
Elbow 90/160mm/1,5mm
More than 5 pcs in stock
€20
incl. VAT
Adjustable Flue Elbow 45° 160mm/2mm
5.0 (1)
In stock
€21
incl. VAT
Pipe 160mm/2mm/25cm
5.0 (2)
In stock
€16
incl. VAT
Pipe 160mm/50cm/1,5mm
In stock
€20
incl. VAT
T-piece 160mm 1,5mm
5.0 (1)
In stock
€44
incl. VAT
Adapter for ceramic chimney 160/160mm/2mm stove/chimney
5.0 (2)
In stock
€29
incl. VAT
Elbow 90/160mm/1,5mm with cleaning opening
In stock
€24
incl. VAT
Damper 160mm/2mm
More than 5 pcs in stock
€24
incl. VAT
Cap (Blanking Plate) 160mm 1.5mm
Back in stock by 23/11/2026
€12
incl. VAT
Ceramic Chimney Adaptor 150/150 mm Stove/Chimney
Delivery within 2 weeks
€29
incl. VAT
Elbow 90°/160mm/1,5mm adjustable
In stock
€30
incl. VAT
Damper 160mm/1,5mm
In stock
€20
incl. VAT
Pipe 160mm/25cm/1,5mm
More than 5 pcs in stock
€13
incl. VAT
Single-wall chimney sleeve 160mm
4.5 (2)
In stock
€8
incl. VAT
Elbow 45/160mm/1,5mm
In stock
€18
incl. VAT
Chimney rosette 160mm
4.0 (1)
In stock
€5
incl. VAT
Ceramic Chimney Reducer with Rosette 200mm/120mm/1,5mm - Chimney/Stove
In stock
€31
incl. VAT
Rosette 160mm/0,5mm
5.0 (2)
In stock
€5
incl. VAT
Ribbed Pipe 160mm/2mm 50cm
Delivery within 7 days
€40
incl. VAT

Sheet thickness: 1.5 mm or 2 mm

The range is divided into the subcategories 1.5 mm thickness and 2 mm thickness. Thicker material means a sturdier part with a longer service life; the thinner version is the usual choice for standard installations. Within one assembly it is best to stick to the same thickness so that all components fit together precisely.

What to base your choice on

The starting point is the diameter of the stove outlet and the diameter of the chimney inlet. These determine the pipes and any adaptor (reducer) you need – there is also a made-to-measure version and a reducer for ceramic chimneys with a rosette. A wall sleeve, single-walled or standard, covers the passage through the wall, and a cap (blanking plate) closes the cleaning opening.

  • Pipes and adjustable 45° elbows for routing the flue
  • Adaptors and reducers for connecting the stove to the chimney
  • Wall sleeves, rosettes and caps for a neat finish at the wall passage
  • Elbow seals for reliable joints
  • Flue dampers for regulating the draught

How to get more heat from your flue

Warm-air heat exchangers and finned pipes increase the surface area that releases heat into the room, so less energy escapes up the chimney. They are most effective on longer vertical sections within the heated space.

Installation and maintenance

Route the flue pipe by the shortest path with as few bends as possible, rising towards the chimney, and fit the joints in the direction of the flue gas flow. Before assembly, check the lengths, the number of elbows and access to the inspection and cleaning opening. Always connect to the chimney in line with your chimney sweep's assessment. As a manufacturer of wood-burning stoves and fireplace inserts in Broumov, we supply parts you can rely on for the long term – honestly built and backed by a five-year warranty.