Description
Steel flue pipes – elbow 90° / 160 mm / 1.5 mm
Steel flue pipes are designed for the visible connection of solid-fuel heat sources (for example solid-fuel boilers, wood-burning stoves, tiled stoves and similar stoves) to a chimney. They are made in the Czech Republic from 1.5mm sheet steel and finished with black Senotherm heat-resistant paint.
Features
- Material: sheet steel, 1.5 mm thick
- Diameter: 160 mm
- Elbow angle: 90°
- Finish: Senotherm heat-resistant paint, black
- Certification: EN 1856-2
- Made in: Czech Republic
Installation and conditions of use
The flue pipes are intended for environments with no risk of explosion and no volatile vapours present. The room in which the heat source is installed must have a fresh air supply via gaps around windows and doors. If this is not the case, a sufficient fresh air supply must be provided through an opening with a cross-section at least equal to that of the flue pipe used, increased by 10%.
The wide range of parts makes it quick and easy to assemble the entire flue route.
Elbow 90/160mm/1,5mm
The 90° elbow connects the stove's flue pipe to the chimney, diameter 160 mm.
- Material: sheet steel, 1.5 mm thick
- Diameter: 160 mm
- Elbow angle: 90°
- Finish: Senotherm heat-resistant paint, black
- Certification: EN 1856-2










