Flue pipes connect your stove or fireplace insert to the chimney. Here you will find pipes, elbows, adaptors and reducers, wall sleeves, caps, as well as warm-air heat exchangers and finned pipes that make use of the heat in the outgoing flue gases.
The range is designed for stove owners and heating engineers putting together a flue system tailored to a specific installation.
Flue pipes
28 products in this category.
Filters (active)
Price
3 € – 145 €
Part type
- elbow7
- pipe7
- stove-to-chimney adaptor4
- damper2
- rosette2
- wall sleeve2
- connector1
- T-piece1
Show more (6)
- warm-air heat exchanger1
- cap / blanking plate1
- adaptor0
- reducer0
- set0
- seal0
Diameterclear
Angle

Elbow - adjustable UNI 160mm/2mm
4.9 (10)
Elbow - Adjustable 90° 160mm/2mm
5.0 (2)
Pipe 160mm/2mm/100cm
4.7 (3)
Pipe 160mm/2mm/50cm
5.0 (1)
Adapter 130mm/150mm/1,5mm - stove/chimney
5.0 (1)
Pipe 160mm/100cm/1.5mm

Elbow 90/160mm/1,5mm

Adjustable Flue Elbow 45° 160mm/2mm
5.0 (1)
Pipe 160mm/2mm/25cm
5.0 (2)
Pipe 160mm/50cm/1,5mm

T-piece 160mm 1,5mm
5.0 (1)
Adapter for ceramic chimney 160/160mm/2mm stove/chimney
5.0 (2)
Elbow 90/160mm/1,5mm with cleaning opening

Damper 160mm/2mm

Cap (Blanking Plate) 160mm 1.5mm

Ceramic Chimney Adaptor 150/150 mm Stove/Chimney

Elbow 90°/160mm/1,5mm adjustable

Damper 160mm/1,5mm

Pipe 160mm/25cm/1,5mm

Single-wall chimney sleeve 160mm
4.5 (2)
Elbow 45/160mm/1,5mm

Chimney rosette 160mm
4.0 (1)
Rosette 160mm/0,5mm
5.0 (2)
Ribbed Pipe 160mm/2mm 50cm
Sheet thickness: 1.5 mm or 2 mm
The range is divided into the subcategories 1.5 mm thickness and 2 mm thickness. Thicker material means a sturdier part with a longer service life; the thinner version is the usual choice for standard installations. Within one assembly it is best to stick to the same thickness so that all components fit together precisely.
What to base your choice on
The starting point is the diameter of the stove outlet and the diameter of the chimney inlet. These determine the pipes and any adaptor (reducer) you need – there is also a made-to-measure version and a reducer for ceramic chimneys with a rosette. A wall sleeve, single-walled or standard, covers the passage through the wall, and a cap (blanking plate) closes the cleaning opening.
- Pipes and adjustable 45° elbows for routing the flue
- Adaptors and reducers for connecting the stove to the chimney
- Wall sleeves, rosettes and caps for a neat finish at the wall passage
- Elbow seals for reliable joints
- Flue dampers for regulating the draught
How to get more heat from your flue
Warm-air heat exchangers and finned pipes increase the surface area that releases heat into the room, so less energy escapes up the chimney. They are most effective on longer vertical sections within the heated space.
Installation and maintenance
Route the flue pipe by the shortest path with as few bends as possible, rising towards the chimney, and fit the joints in the direction of the flue gas flow. Before assembly, check the lengths, the number of elbows and access to the inspection and cleaning opening. Always connect to the chimney in line with your chimney sweep's assessment. As a manufacturer of wood-burning stoves and fireplace inserts in Broumov, we supply parts you can rely on for the long term – honestly built and backed by a five-year warranty.