Wall sleeves in 1.5 mm sheet steel connect the flue pipe into the chimney opening. They come in 120, 130, 150, 160, 180 and 200 mm diameters, matching the usual flue pipe sizes for wood-burning stoves and fireplace inserts.
This category is designed for installers, chimney sweeps and stove owners sorting out the connection into the chimney.
Wall thimbles 1.5mm
2 products in this category.
How to choose a wall sleeve
The key factor is the diameter of the flue pipe entering the chimney. The sleeve must be the same size as the pipe it connects to — so for a stove with a 150 mm outlet, choose a 150 mm sleeve. If the flue pipe diameter differs from the chimney opening, the transition is handled with a reducer, not a bigger sleeve.
A 1.5 mm wall thickness is standard across this part of our flue range. Thicker material copes better with heat stress and keeps its shape even after years of use – worthwhile for a part built into the chimney wall, as replacing it means building work.
Installation and what goes with it
- The sleeve is set into the chimney opening and fixed with a suitable heat-resistant mortar.
- The flue pipe slides into the sleeve so it doesn't protrude into the chimney flue.
- The joint is finished off with a rosette that covers the gap between wall and pipe.
Don't forget
Complete the flue route as needed with elbows, pipes and a section with a cleaning door so the flue pipe can be inspected. Always have the connection of stoves and inserts to the chimney and their commissioning checked by a chimney sweep — a properly made joint at the chimney is the foundation of safe and efficient heating.
