Heavy-gauge flue pipes in 2 mm sheet steel for a permanent connection between your stove and the chimney. Here you will find pipes in 25, 50 and 100 cm lengths, finned pipes, adjustable elbows, wall sleeves, rosettes, adaptors, connectors and complete sets.
The choice for anyone who wants a flue built for a long life and heavy use.
Thickness 2mm
21 products in this category.
Filters (active)

Pipe 150mm/2mm/100cm
4.9 (23)
Flue Pipe 150mm/2mm/50cm
4.9 (12)
Flue pipe 180mm/2mm/100cm
4.0 (1)
Pipe 200mm/2mm/100cm
4.8 (6)
Pipe 160mm/2mm/100cm
4.7 (3)
Pipe 150mm/2mm/25cm
5.0 (4)
Pipe 180mm/2mm/50cm
4.0 (2)
Flue Pipe 200mm/2mm/50cm
5.0 (3)
Pipe 160mm/2mm/50cm
5.0 (1)
Flue pipe 180mm/2mm/25cm
5.0 (1)
Ribbed Pipe 150mm/2mm 50cm
5.0 (1)
Pipe 160mm/2mm/25cm
5.0 (2)
Pipe 200mm/2mm/25cm

Set 150mm/2mm with fixed elbow (Pipe, Elbow, Collar, Rosette)
5.0 (1)
Ribbed Pipe 180mm/2mm 50cm

Connector 150mm/2mm 25cm

Ribbed Pipe 200mm/2mm 50cm

Coupler 180mm/2mm 25cm

Ribbed Pipe 160mm/2mm 50cm

Connector 200mm/2mm 25cm

Connector 160mm/2mm 25cm
Why 2 mm thickness
Thicker material better withstands high temperatures and corrosion from flue gases, so the flue lasts considerably longer than thin-walled versions. We recommend it especially where the stove is used all season, where the flue runs through a visible part of the room and should look robust, or where you want to get the most out of the outgoing heat with finned pipes.
How to put your flue together
The starting point is the diameter of the stove outlet – we offer 150, 160, 180 and 200 mm. Depending on the distance between the stove and the chimney, choose a combination of pipes and an adjustable elbow, finish the chimney connection with a wall sleeve and cover the visible gap with a rosette. If the outlet or chimney opening size doesn't match, use adaptors, including made-to-measure adaptors for ceramic chimneys.
- Pipes and connectors for the flue route itself
- Adjustable elbows for changing direction without unnecessary joints
- Pipes with damper for draught control
- Anti-condensation sections where condensate could run back into the stove
- Mounting clamps and elbow seals for a solid, neat assembly
When you want it simple
For standard installations there are ready-made sets containing a pipe, elbow, wall sleeve and rosette in one delivery. They save time choosing and you can be sure the parts fit together. Before installation, check what diameter and connection method your chimney and inspection report specify.