Heavy-gauge flue pipes in 2 mm sheet steel for a permanent connection between your stove and the chimney. Here you will find pipes in 25, 50 and 100 cm lengths, finned pipes, adjustable elbows, wall sleeves, rosettes, adaptors, connectors and complete sets.
The choice for anyone who wants a flue built for a long life and heavy use.
Thickness 2mm
28 products in this category.
Filters (active)

Elbow - adjustable 90° 150mm/2mm
4.9 (18)
Pipe 150mm/2mm/100cm
4.9 (23)
Elbow - adjustable UNI 150mm/2mm
4.7 (17)
Flue Pipe 150mm/2mm/50cm
4.9 (12)
Flue pipe 180mm/2mm/100cm
4.0 (1)
Elbow - adjustable UNI 180mm/2mm
5.0 (2)
Elbow - adjustable UNI 160mm/2mm
4.9 (10)
Pipe 200mm/2mm/100cm
4.8 (6)
Elbow - Adjustable 90° 160mm/2mm
5.0 (2)
Pipe 160mm/2mm/100cm
4.7 (3)
Elbow - adjustable 45° 150mm/2mm
5.0 (7)
Elbow - adjustable 90° 180mm/2mm
4.0 (2)
Pipe 150mm/2mm/25cm
5.0 (4)
Pipe 180mm/2mm/50cm
4.0 (2)
Elbow - Adjustable UNI 200mm/2mm
5.0 (2)
Elbow - adjustable 45° 180mm/2mm
5.0 (1)
Flue Pipe 200mm/2mm/50cm
5.0 (3)
Pipe 160mm/2mm/50cm
5.0 (1)
Elbow - adjustable 90° 200mm/2mm
5.0 (3)
Flue pipe 180mm/2mm/25cm
5.0 (1)
Ribbed Pipe 150mm/2mm 50cm
5.0 (1)
Adjustable Flue Elbow 45° 160mm/2mm
5.0 (1)
Pipe 160mm/2mm/25cm
5.0 (2)
Pipe 200mm/2mm/25cm
Why 2 mm thickness
Thicker material better withstands high temperatures and corrosion from flue gases, so the flue lasts considerably longer than thin-walled versions. We recommend it especially where the stove is used all season, where the flue runs through a visible part of the room and should look robust, or where you want to get the most out of the outgoing heat with finned pipes.
How to put your flue together
The starting point is the diameter of the stove outlet – we offer 150, 160, 180 and 200 mm. Depending on the distance between the stove and the chimney, choose a combination of pipes and an adjustable elbow, finish the chimney connection with a wall sleeve and cover the visible gap with a rosette. If the outlet or chimney opening size doesn't match, use adaptors, including made-to-measure adaptors for ceramic chimneys.
- Pipes and connectors for the flue route itself
- Adjustable elbows for changing direction without unnecessary joints
- Pipes with damper for draught control
- Anti-condensation sections where condensate could run back into the stove
- Mounting clamps and elbow seals for a solid, neat assembly
When you want it simple
For standard installations there are ready-made sets containing a pipe, elbow, wall sleeve and rosette in one delivery. They save time choosing and you can be sure the parts fit together. Before installation, check what diameter and connection method your chimney and inspection report specify.