Square rope seals in 6x6, 8x8, 10x10 and 12x12 mm profiles are used to renew the door seals of wood-burning stoves and fireplace inserts with a square channel. They are complemented by adhesives designed for high temperatures.
Ideal for stove owners, service engineers and stove fitters replacing a worn seal.
Square
2 products in this category.
Filters (active)
Price
3 € – 6 €
Type
- square rope seal0
Dimensions
- 6x6 mm0
- 8x8 mm0
- 10x10 mm0
- 12x12 mm0
How to choose the right profile
The shape and width of the channel in the door are what matter. A square profile belongs in a rectangular channel, where its flat side sits against the frame and spreads the pressure evenly all the way round. So first remove the old rope, clean the channel and measure its width and depth. Then choose 6x6, 8x8, 10x10 or 12x12 mm accordingly. A rope that is too thin will let air through the door, while one that is too thick stops the door closing and puts strain on the hinges and latch.
How to replace it
- clean the channel of any remains of the old seal and adhesive
- apply rope seal adhesive, for example Thermo Glue
- lay the rope in without stretching it and butt the ends together
- keep the door closed until the adhesive has dried
When to replace the seal
Over time, heat-resistant rope becomes compressed and brittle and loses its elasticity. You will notice the door closing more loosely than before, the glass blackening, or the fire being harder to tame and the fuel burning faster than it should. A leaky door means an uncontrolled air supply and therefore higher wood consumption.
We recommend treating seal replacement as a routine part of pre-season stove maintenance, just like checking the glass and sweeping the flue ways. It is a small job that pays you back with calmer, more economical burning all winter long.

