Czech stove manufacturer
+420 491 422 647

Round heat-resistant rope seals for the doors of wood-burning stoves and fireplace inserts in diameters of 4, 6, 8, 10, 12 and 14 mm, plus seal adhesive including the Thermo Glue version. For anyone who wants to restore the original seal of their firebox themselves.

Round

1 product in this category.

Filters (active)
Price
–€

3 € – 4 €

Brandclear
Typeclear
Dimensions
  • 4 mm0
  • 6 mm0
  • 8 mm0
  • 10 mm0
  • 12 mm0
  • 14 mm0

How to choose the right diameter

The width of the channel in the door and the condition of the original rope are what matter. Carefully pull out the old seal, remove any adhesive residue from the channel and measure the rope at a point where it has not been squashed by use. If the material has flattened completely, measure the channel itself and choose a diameter that sits comfortably in it and forms a continuous seal all the way round when the door is closed.

Why seals need replacing

Heat-resistant rope is a consumable part. Repeated compression and heat make it lose its elasticity, the door stops closing tightly and unwanted air is drawn into the firebox. You will notice the wood burning faster, output being harder to control and the glass sooting up more. A new seal usually solves these problems and brings back the behaviour you are used to.

Things to remember when fitting

  • Clean dust and grease from the channel before gluing.
  • Use an adhesive designed for rope seals that can withstand firebox temperatures.
  • Do not stretch the rope; lay it in loosely and place the joint at the bottom of the door.
  • Before lighting the first fire, let the adhesive set as instructed on the packaging.

As well as round profiles, flat seals are also used on doors and glass – you will find them in the other heat-resistant seal sections. A careful replacement takes just a few tens of minutes and shows directly in your fuel consumption.