Czech stove manufacturer
+420 491 422 647

Flexible aluminium ducting in diameters from 80 to 160 mm and lengths of 1.5 and 3 m, complete with hose clips, screw clamps and mounting brackets. The basis of every warm-air distribution system that carries heat from a fireplace insert to rooms further away.

Round ducting

2 products in this category.

Filters (active)
Price
–€

3 € – 34 €

Brand
  • Parkanex0
Part typeclear
Diameterclear
Material
  • galvanised steel0
  • galvanised steel0
Colour
  • galvanised0

How to choose the duct diameter

Base the diameter on the output of the fireplace insert and the number of outlets you want to connect. The longer the run and the more bends, the greater the air resistance — for longer systems it pays to choose a larger diameter and run the ducting as directly as possible. The flexible design makes it easy to get round beams, rafters and load-bearing structures without needing shaped fittings.

What the system needs

  • aluminium ducting in 1.5 and 3 m lengths, depending on the distance between the fireplace and the room
  • hose clips and screw clamps for a firm, airtight connection at the spigots
  • mounting brackets for flexible ducting that hold the run at the chosen fall
  • a 30 m roll of banding for larger installations

Things to consider when fitting

Tighten every joint properly — a leak means warm air escaping into the structure instead of the room. Avoid very sharp bends and do not let the ducting sag, otherwise airflow will be reduced. It is a good idea to insulate the run along its whole length so that heat does not escape into ceiling voids and unheated spaces.

Plan the warm-air distribution together with your choice of fireplace insert, ideally before the surround is built. Allow for access to inspection openings and make sure the ducting can still be checked once the cladding is finished.