Czech stove manufacturer
+420 491 422 647

Reducers with rosette connect the stove outlet to the inlet of a ceramic chimney while neatly finishing off the opening in the wall. You'll find thirteen diameter combinations from 120 to 200 mm, made from 1.5 mm material.

Suitable for installation firms and stove owners who need to switch to a different diameter.

How to choose the right reducer

Each reducer lists two sizes in the order chimney/stove. The first number is the diameter of the inlet in the ceramic chimney, the second is the diameter of the flue pipe coming from the appliance. For example, the 180/150 mm version suits a chimney liner of 180 mm and a stove outlet of 150 mm. Measure both diameters before buying – ideally the internal diameter of the inlet.

What the rosette is for

The rosette is an edge collar that covers the gap between the reducer and the wall or cladding at the opening. The result looks neat, and if the flue pipe is ever removed, there's no exposed hole left around the inlet.

Installation tips

  • Fit the reducer with the wider end facing into the chimney and the narrower end towards the flue pipe parts.
  • Assemble the joints in the direction of flue gas flow and make sure the pipes overlap sufficiently.
  • Route the flue pipe with as few changes of direction as possible so the draught stays steady.
  • Keep access for cleaning so the flue pipe can be dismantled without disturbing the cladding.

What else to buy with a reducer

The assembly is usually completed with other 1.5 mm flue parts – pipes, elbows and adaptors in the same diameter as the stove outlet. The 1.5 mm material thickness is designed for the permanent connection of solid-fuel appliances and copes with normal operating loads throughout the heating season. Leave the chimney connection to a professional firm who will assess the condition of the chimney.