Heat-resistant rope seals for the doors and glazing of wood-burning stoves and fireplace inserts. You will find round and square profiles in standard sizes, flat glass seals, ready-made kits and adhesive for fitting.
This category is for stove owners who want to restore the seal of their firebox themselves, as well as for service engineers.
Heat-resistant seals
4 products in this category.
Filters (active)

Round Door Sealing Rope + Adhesive 10mm 2.5m
4.5 (4)
Round door sealing rope + adhesive 6mm 2.5m

Door sealing rope, round 10mm
4.6 (8)
Door sealing rope, round 6mm
5.0 (2)How to choose the right seal
Profile and size are what matter. The door channel takes a round rope from 4 to 14 mm in diameter or a square profile from 6x6 to 12x12 mm, while flat seals in 8x2, 10x3 and 12x4 mm are used under the glass. Before buying, remove the old seal, measure its cross-section and compare it with the channel — the new seal should fill the channel, not squeeze out of it.
Subcategories and packs
- Round — ropes for the channel of the firebox door and ash pan door
- Square — profiles for doors with a rectangular channel
- Flat glass seals — seals between the glass and the door frame
- Kits — 2.5 m of rope together with adhesive, a handy solution for one replacement
Fitting and maintenance
Clean the channel of any remnants of the old seal and ash, otherwise the adhesive will not hold. Fit the rope in one piece, place the joint at the bottom of the door and let the adhesive dry before lighting the first fire. Use seal adhesive or the Thermo Glue version.
A tight door seal has a direct effect on combustion control and fuel consumption. If a sheet of paper placed between the door and the frame can easily be pulled out with the handle closed, it is time for a replacement. We recommend checking before every heating season — it is the simplest way to keep your stove in good shape for many years.