Ready-made combinations of heat-resistant seal and adhesive for repairing doors and bedding the glass of wood-burning stoves and fireplace inserts. You will find flat glass seals in widths of 8, 10 and 12 mm and round door ropes in 2.5 m lengths, complete with heat-resistant adhesive.
Ideal for anyone who can replace a seal themselves.
Heat-resistant seal sets
2 products in this category.
Filters (active)
How to choose the right kit
The size of the original seal is what matters. For glass, flat rope is measured by the width and height of the profile, i.e. 8x2, 10x3 or 12x4 mm. For doors, go by the diameter of the round rope, most often 6, 8, 10 or 12 mm. Carefully pull out the old seal and measure it before you buy, so the new rope sits neither too loosely nor too tightly in the channel.
Replacement step by step
- Remove the remains of the old seal and clear the channel of ash and dried adhesive.
- Apply seal adhesive or Thermo Glue in a thin continuous line.
- Lay the rope in without stretching it and butt the ends together at the least stressed point.
- Close the door and let the joint harden, and only then light the stove gently.
Why the seal matters
A worn seal lets in unwanted air, so the wood burns faster, the output is harder to control and the glass soots up more. Test it with a sheet of paper shut in the door: if it pulls out easily, it is time for a new seal. Our kits let you buy everything you need in one go and get the job done in a single afternoon. You will also find rope and adhesive separately in the parent Heat-resistant seals section.

