Flue pipes connect your stove or fireplace insert to the chimney. Here you will find pipes, elbows, adaptors and reducers, wall sleeves, caps, as well as warm-air heat exchangers and finned pipes that make use of the heat in the outgoing flue gases.
The range is designed for stove owners and heating engineers putting together a flue system tailored to a specific installation.
Flue pipes
13 products in this category.
Filters (active)
Price
3 € – 145 €
Part type
- pipe4
- elbow3
- damper1
- adaptor1
- stove-to-chimney adaptor1
- rosette1
- connector1
- wall sleeve1
Show more (6)
- reducer0
- set0
- T-piece0
- warm-air heat exchanger0
- seal0
- cap / blanking plate0
Diameterclear
- 120 mm0
- 120/130 mm0
- 120/150 mm0
- 120/160 mm0
- 125/130 mm0
- 125/150 mm0
- 130 mm0
- 130/120 mm0
Show more (26)
- 130/150 mm0
- 130/160 mm0
- 145/150 mm0
- 150 mm13
- 150/120 mm0
- 150/130 mm0
- 150/160 mm2
- 150/180 mm2
- 150/200 mm2
- 160 mm13
- 160/120 mm0
- 160/130 mm0
- 160/150 mm1
- 160/180 mm2
- 160/200 mm2
- 180 mm13
- 180/120 mm0
- 180/150 mm1
- 180/160 mm1
- 180/200 mm2
- 200 mm13
- 200/120 mm0
- 200/130 mm0
- 200/150 mm1
- 200/160 mm1
- 200/180 mm2
Angle

Pipe 200mm/2mm/100cm
4.8 (6)
Adapter for ceramic chimney 200/200mm/2mm stove/chimney

Elbow - Adjustable UNI 200mm/2mm
5.0 (2)
Flue Pipe 200mm/2mm/50cm
5.0 (3)
Elbow - adjustable 90° 200mm/2mm
5.0 (3)
Pipe 200mm/2mm/25cm

Damper 200mm/2mm
5.0 (1)
Elbow - Adjustable 45° 200mm/2mm

Ribbed Pipe 200mm/2mm 50cm

Chimney rosette 200mm

Single-Wall Flue Thimble 200mm

Connector 200mm/2mm 25cm

Anti-Condensation Extension 200mm/2mm
Sheet thickness: 1.5 mm or 2 mm
The range is divided into the subcategories 1.5 mm thickness and 2 mm thickness. Thicker material means a sturdier part with a longer service life; the thinner version is the usual choice for standard installations. Within one assembly it is best to stick to the same thickness so that all components fit together precisely.
What to base your choice on
The starting point is the diameter of the stove outlet and the diameter of the chimney inlet. These determine the pipes and any adaptor (reducer) you need – there is also a made-to-measure version and a reducer for ceramic chimneys with a rosette. A wall sleeve, single-walled or standard, covers the passage through the wall, and a cap (blanking plate) closes the cleaning opening.
- Pipes and adjustable 45° elbows for routing the flue
- Adaptors and reducers for connecting the stove to the chimney
- Wall sleeves, rosettes and caps for a neat finish at the wall passage
- Elbow seals for reliable joints
- Flue dampers for regulating the draught
How to get more heat from your flue
Warm-air heat exchangers and finned pipes increase the surface area that releases heat into the room, so less energy escapes up the chimney. They are most effective on longer vertical sections within the heated space.
Installation and maintenance
Route the flue pipe by the shortest path with as few bends as possible, rising towards the chimney, and fit the joints in the direction of the flue gas flow. Before assembly, check the lengths, the number of elbows and access to the inspection and cleaning opening. Always connect to the chimney in line with your chimney sweep's assessment. As a manufacturer of wood-burning stoves and fireplace inserts in Broumov, we supply parts you can rely on for the long term – honestly built and backed by a five-year warranty.