Czech stove manufacturer
+420 491 422 647

Flue pipes connect your stove or fireplace insert to the chimney. Here you will find pipes, elbows, adaptors and reducers, wall sleeves, caps, as well as warm-air heat exchangers and finned pipes that make use of the heat in the outgoing flue gases.

The range is designed for stove owners and heating engineers putting together a flue system tailored to a specific installation.

Home/Flue pipes

Flue pipes

28 products in this category.

Filters (active)
Flue pipe 180mm/2mm/100cm
4.0 (1)
More than 5 pcs in stock
€38
incl. VAT
Elbow - adjustable UNI 180mm/2mm
5.0 (2)
More than 5 pcs in stock
€41
incl. VAT
Elbow - adjustable 90° 180mm/2mm
4.0 (2)
Back in stock by 26/11/2026
€30
incl. VAT
Pipe 180mm/2mm/50cm
4.0 (2)
More than 5 pcs in stock
€24
incl. VAT
Ceramic chimney adaptor 180/180mm/2mm stove/chimney
More than 5 pcs in stock
€29
incl. VAT
Elbow - adjustable 45° 180mm/2mm
5.0 (1)
More than 5 pcs in stock
€21
incl. VAT
Flue pipe 180mm/2mm/25cm
5.0 (1)
More than 5 pcs in stock
€18
incl. VAT
Flue pipe 180mm/100cm/1,5mm
In stock
€33
incl. VAT
Elbow 90/180mm/1,5mm with Cleaning Opening
In stock
€26
incl. VAT
Pipe 180mm/50cm/1,5mm
In stock
€21
incl. VAT
Damper 180mm/2mm
In stock
€26
incl. VAT
T-piece 180mm 1,5mm
In stock
€47
incl. VAT
Warm-Air Heat Exchanger 180mm, Large
More than 5 pcs in stock
€145
incl. VAT
Elbow 90/180mm/1,5mm
In stock
€23
incl. VAT
End cap (blanking cap) 180mm 1.5mm
In stock
€13
incl. VAT
Ribbed Pipe 180mm/2mm 50cm
In stock
€43
incl. VAT
Pipe 180mm/25cm/1,5mm
In stock
€13
incl. VAT
Elbow 45/180mm/1,5mm
5.0 (1)
In stock
€20
incl. VAT
Chimney rosette 180mm
In stock
€6
incl. VAT
Single-Wall Thimble 180mm
5.0 (1)
In stock
€9
incl. VAT
Anti-Condensation Extension 180mm/2mm
Delivery within 7 days
€30
incl. VAT
Coupler 180mm/2mm 25cm
Delivery within 6 days
€18
incl. VAT
Ceramic Chimney Reducer with Rosette 200mm/130mm/1,5mm - chimney/stove
Delivery within 5 days
€31
incl. VAT
Rosette 180mm/0.5mm
In stock
€5
incl. VAT

Sheet thickness: 1.5 mm or 2 mm

The range is divided into the subcategories 1.5 mm thickness and 2 mm thickness. Thicker material means a sturdier part with a longer service life; the thinner version is the usual choice for standard installations. Within one assembly it is best to stick to the same thickness so that all components fit together precisely.

What to base your choice on

The starting point is the diameter of the stove outlet and the diameter of the chimney inlet. These determine the pipes and any adaptor (reducer) you need – there is also a made-to-measure version and a reducer for ceramic chimneys with a rosette. A wall sleeve, single-walled or standard, covers the passage through the wall, and a cap (blanking plate) closes the cleaning opening.

  • Pipes and adjustable 45° elbows for routing the flue
  • Adaptors and reducers for connecting the stove to the chimney
  • Wall sleeves, rosettes and caps for a neat finish at the wall passage
  • Elbow seals for reliable joints
  • Flue dampers for regulating the draught

How to get more heat from your flue

Warm-air heat exchangers and finned pipes increase the surface area that releases heat into the room, so less energy escapes up the chimney. They are most effective on longer vertical sections within the heated space.

Installation and maintenance

Route the flue pipe by the shortest path with as few bends as possible, rising towards the chimney, and fit the joints in the direction of the flue gas flow. Before assembly, check the lengths, the number of elbows and access to the inspection and cleaning opening. Always connect to the chimney in line with your chimney sweep's assessment. As a manufacturer of wood-burning stoves and fireplace inserts in Broumov, we supply parts you can rely on for the long term – honestly built and backed by a five-year warranty.