Czech stove manufacturer
+420 491 422 647

Flue pipes connect your stove or fireplace insert to the chimney. Here you will find pipes, elbows, adaptors and reducers, wall sleeves, caps, as well as warm-air heat exchangers and finned pipes that make use of the heat in the outgoing flue gases.

The range is designed for stove owners and heating engineers putting together a flue system tailored to a specific installation.

Home/Flue pipes

Flue pipes

3 products in this category.

Filters (active)
Price
–€

3 € – 145 €

Brand
Part type
  • damper0
  • adaptor0
  • stove-to-chimney adaptor0
  • reducer0
  • rosette0
  • set0
  • connector0
  • T-piece0
  • Show more (5)
    • warm-air heat exchanger0
    • seal0
    • pipe0
    • cap / blanking plate0
    • wall sleeve0
Diameterclear
  • 120 mm1
  • 120/130 mm0
  • 120/150 mm0
  • 120/160 mm0
  • 125/130 mm0
  • 125/150 mm0
  • 130 mm1
  • 130/120 mm0
  • Show more (26)
    • 130/150 mm0
    • 130/160 mm0
    • 145/150 mm0
    • 150 mm3
    • 150/120 mm0
    • 150/130 mm0
    • 150/160 mm0
    • 150/180 mm0
    • 150/200 mm0
    • 160 mm2
    • 160/120 mm0
    • 160/130 mm0
    • 160/150 mm0
    • 160/180 mm0
    • 160/200 mm0
    • 180 mm2
    • 180/120 mm0
    • 180/150 mm0
    • 180/160 mm0
    • 180/200 mm0
    • 200 mm2
    • 200/120 mm0
    • 200/130 mm0
    • 200/150 mm0
    • 200/160 mm0
    • 200/180 mm0
Material thickness (mm)
Angleclear

Sheet thickness: 1.5 mm or 2 mm

The range is divided into the subcategories 1.5 mm thickness and 2 mm thickness. Thicker material means a sturdier part with a longer service life; the thinner version is the usual choice for standard installations. Within one assembly it is best to stick to the same thickness so that all components fit together precisely.

What to base your choice on

The starting point is the diameter of the stove outlet and the diameter of the chimney inlet. These determine the pipes and any adaptor (reducer) you need – there is also a made-to-measure version and a reducer for ceramic chimneys with a rosette. A wall sleeve, single-walled or standard, covers the passage through the wall, and a cap (blanking plate) closes the cleaning opening.

  • Pipes and adjustable 45° elbows for routing the flue
  • Adaptors and reducers for connecting the stove to the chimney
  • Wall sleeves, rosettes and caps for a neat finish at the wall passage
  • Elbow seals for reliable joints
  • Flue dampers for regulating the draught

How to get more heat from your flue

Warm-air heat exchangers and finned pipes increase the surface area that releases heat into the room, so less energy escapes up the chimney. They are most effective on longer vertical sections within the heated space.

Installation and maintenance

Route the flue pipe by the shortest path with as few bends as possible, rising towards the chimney, and fit the joints in the direction of the flue gas flow. Before assembly, check the lengths, the number of elbows and access to the inspection and cleaning opening. Always connect to the chimney in line with your chimney sweep's assessment. As a manufacturer of wood-burning stoves and fireplace inserts in Broumov, we supply parts you can rely on for the long term – honestly built and backed by a five-year warranty.