Flue pipes connect your stove or fireplace insert to the chimney. Here you will find pipes, elbows, adaptors and reducers, wall sleeves, caps, as well as warm-air heat exchangers and finned pipes that make use of the heat in the outgoing flue gases.
The range is designed for stove owners and heating engineers putting together a flue system tailored to a specific installation.
Flue pipes
20 products in this category.
Filters (active)

Damper 150 mm/2mm
5.0 (8)
Flue Damper 120mm/1,5mm
4.5 (2)
Damper 150mm/1,5mm
5.0 (5)
Damper 130mm/1,5mm
5.0 (2)
Wall Thimble 120mm/1.5mm
4.9 (13)
Single-wall flue sleeve 150mm
4.0 (1)
Damper 180mm/2mm

Wall Thimble 150mm/1.5mm
4.0 (2)
Damper 200mm/2mm
5.0 (1)
Damper 160mm/2mm

Wall Sleeve 130mm/1.5mm
5.0 (2)
Damper 160mm/1,5mm

Damper 200mm/1,5mm
4.0 (1)
Single-wall chimney sleeve 160mm
4.5 (2)
Single-Wall Thimble 180mm
5.0 (1)
Damper 180mm/1,5mm

Single-Wall Flue Thimble 200mm

Wall sleeve 200mm/1,5mm
4.0 (1)
Wall Thimble 160mm/1.5mm

Wall thimble 180mm/1,5mm
Sheet thickness: 1.5 mm or 2 mm
The range is divided into the subcategories 1.5 mm thickness and 2 mm thickness. Thicker material means a sturdier part with a longer service life; the thinner version is the usual choice for standard installations. Within one assembly it is best to stick to the same thickness so that all components fit together precisely.
What to base your choice on
The starting point is the diameter of the stove outlet and the diameter of the chimney inlet. These determine the pipes and any adaptor (reducer) you need – there is also a made-to-measure version and a reducer for ceramic chimneys with a rosette. A wall sleeve, single-walled or standard, covers the passage through the wall, and a cap (blanking plate) closes the cleaning opening.
- Pipes and adjustable 45° elbows for routing the flue
- Adaptors and reducers for connecting the stove to the chimney
- Wall sleeves, rosettes and caps for a neat finish at the wall passage
- Elbow seals for reliable joints
- Flue dampers for regulating the draught
How to get more heat from your flue
Warm-air heat exchangers and finned pipes increase the surface area that releases heat into the room, so less energy escapes up the chimney. They are most effective on longer vertical sections within the heated space.
Installation and maintenance
Route the flue pipe by the shortest path with as few bends as possible, rising towards the chimney, and fit the joints in the direction of the flue gas flow. Before assembly, check the lengths, the number of elbows and access to the inspection and cleaning opening. Always connect to the chimney in line with your chimney sweep's assessment. As a manufacturer of wood-burning stoves and fireplace inserts in Broumov, we supply parts you can rely on for the long term – honestly built and backed by a five-year warranty.