Adaptors for ceramic chimneys connect the stove's flue pipe to the chimney inlet and bridge the difference in diameter. You'll find combinations from 150 to 200 mm in 2 mm steel, such as 150/180, 160/200 or 180/200 mm.
Suitable for stove owners and installers dealing with a connection to a ceramic chimney.
Chimney adaptors
3 products in this category.
Filters (active)
Diameterclear
Length (cm)
- 14 cm0
How to choose the right adaptor
Adaptor sizes are given as a pair of numbers meaning stove/chimney. The first value is the diameter of the flue pipe coming from the appliance, the second is the diameter of the ceramic chimney inlet. Measure both sides of the connection before ordering – if the diameters are the same, look for a 150/150 or 180/180 mm type; if they differ, use the matching combination, such as 160/180 mm.
Why 2 mm steel
Thicker material copes better with heat stress and repeated cleaning, and lasts considerably longer in use than thin pressed parts. For permanent connections that aren't dismantled every season, it's the sensible choice.
Installation tips
- Seal the joint into the chimney inlet with a suitable heat-resistant sealant or rope.
- Respect the direction of flue gas flow – fit the adaptor so the parts slot into each other in the direction of the draught.
- Leave access for inspecting and sweeping the chimney.
- Have the connection checked by a chimney sweep – an inspection is a precondition for safe operation.
The adaptor is usually combined with other parts from our 2 mm flue pipe range – pipes, elbows, cleaning sections or reducers. As a manufacturer of stoves and fireplace inserts in Broumov, we know that the reliability of an assembly comes down to the joints: a well-chosen adaptor maintains draught, keeps flue gases out of the room and keeps the stove running at its best all season.
