Czech stove manufacturer
+420 491 422 647

Adaptors – reducers between the stove outlet and the chimney – with a heavier 1.5 mm wall. You'll find combinations of standard diameters from 120 to 200 mm, both reducing and enlarging, as well as made-to-measure adaptors.

Ideal wherever the appliance outlet and the chimney inlet don't match in size.

Adaptors 1.5mm

1 product in this category.

Filters (active)
Price
–€

12 € – 23 €

Diameter
  • 120/130 mm0
  • 120/150 mm0
  • 120/160 mm0
  • 125/130 mm0
  • 125/150 mm0
  • 130/120 mm0
  • 130/150 mm0
  • 130/160 mm0
  • Show more (13)
    • 145/150 mm0
    • 150/120 mm0
    • 150/130 mm0
    • 150/160 mm0
    • 160/120 mm0
    • 160/130 mm0
    • 160/150 mm0
    • 160/180 mm0
    • 180/150 mm0
    • 180/160 mm0
    • 180/200 mm0
    • 200/150 mm0
    • 200/180 mm0
Length (cm)clear

How to choose the right adaptor

Two diameters matter: the appliance outlet and the opening the flue pipe leads into. The product name always gives the first and second size, so you can choose the adaptor exactly according to your measurements on site. Measure on a clean outlet, free of sealant residue and dirt, so the joint really seats properly.

The range covers both reducing and enlarging – for example from 160 to 120 mm, from 130 to 150 mm or from 180 to 200 mm. If your installation needs an unusual combination, choose a made-to-measure adaptor.

1.5 mm thickness and why it matters

Thicker material copes better with heat stress and handling during installation and cleaning. For parts that remain permanently in the flue system it pays not to skimp – an adaptor behind a surround or a stove isn't easy to replace.

Installation tips

  • Orient the joint so that condensate can't run out of the flue pipe.
  • Secure and seal the joints with material designed for high temperatures.
  • Leave access for inspecting and sweeping the flue system.
  • Complete the assembly with other 1.5 mm parts – pipes, elbows and cleaning sections.

The flue pipe is an integral part of the heating system, so always consult a chimney sweep, who will assess the connection to your particular chimney.