Czech stove manufacturer
+420 491 422 647

Straight flue pipes made from heavy-gauge 2 mm sheet steel for connecting a stove or fireplace insert to the chimney. They are available in diameters of 150, 160, 180 and 200 mm and in three lengths – 25, 50 and 100 cm.

The choice for anyone building a durable flue who does not want to bother with thin sheet metal.

2mm pipes

0 products in this category.

🔍

Nothing found

No product matches the selected filters. Try removing some of them.

Clear filters

How to choose the right pipe

The key factor is the diameter: it must match the appliance's flue outlet. Never narrow or widen the flue pipe according to whatever happens to be to hand – any deviation will show in the draught and in combustion. The second step is the length. It is practical to build the run from longer pieces and make it up with shorter ones, so there are as few joints as possible.

A wall thickness of 2 mm means greater resistance to burn-through and a longer service life than thinner materials. This pays off especially in the first metres above the stove, where flue gas temperatures are highest.

Things to consider when fitting

  • Always join pipes in the direction of flue gas flow so that any condensate does not leak out of the joint.
  • Run horizontal sections with a slight rise towards the chimney and keep them as short as possible.
  • Leave a clearance from combustible materials and make sure there is access for cleaning.
  • Measure the run on site before buying and allow for the overlap into the sockets.

What goes with the pipes

The pipes themselves are only part of the assembly. Depending on the layout of the room, add elbows, cleaning pieces, reducers or flue collars – you will find them all in the parent Flue pipes section in the 2 mm version, so the whole run stays in the same material standard.

Not sure what you need? Send us the dimensions and the type of appliance and we will help you put the set together.