Czech stove manufacturer
+420 491 422 647

Here you will find heavy-gauge 1.5 mm flue pipes with a built-in damper in diameters from 120 to 200 mm. They are used to regulate the draught manually in the flue between the stove and the chimney.

Useful wherever the chimney draught is stronger than the firebox needs and has to be evened out.

What to look for in a pipe with a damper

Diameter is the deciding factor. Always go by the size of the stove's or fireplace insert's flue outlet, not the size of the chimney opening. In this range you can choose between 120, 130, 150, 160, 180 and 200 mm. The second parameter is material thickness — the whole group has a 1.5 mm wall, a sturdier design with a longer service life for everyday use.

What the damper is for

The rotating damper inside the pipe narrows the passage for flue gases and so limits excessive draught. In practice, this means the fuel does not burn unnecessarily fast and the heat stays in the stove longer instead of going up the chimney. The damper is operated by a lever on the outside of the pipe and must never close the flue completely.

Things to remember when fitting

  • Place the damper in a vertical section of the flue within easy reach, not behind furniture or cladding.
  • Join the parts in the right direction so that condensate runs inside the joint.
  • Add connecting pieces and reducers from the flue pipe range in the same 1.5 mm thickness.
  • Make sure there is access for cleaning and inspection.

If you are unsure about the diameter or the make-up of the whole flue gas route, drop us a line — we will advise you based on your stove and chimney.