Czech stove manufacturer
+420 491 422 647

Description

The 125 mm galvanised sheet-steel connector is part of a system for warm-air distribution from a single heat source (e.g. a fireplace insert) to several rooms.

Remember that:

  • The heat output of the fireplace (fireplace insert) must always be sufficient for whether you will use it as the main heating or only as supplementary heating (background heat).
  • There must be an adequate air supply to the room from which the ducting runs and where the fire burns in the fireplace insert.
  • Except in the very simplest warm-air distribution systems (e.g. ducting air only to the upper floor), a fan of the required capacity must be fitted in the system.
  • All warm-air outlets must be closable and, where possible, continuously adjustable, so that you always heat only the spaces you want to heat.
  • If you blow air into a room, you must also make sure that the cooled air has a way to flow back out. Slight overpressure does no harm, but in a completely sealed room (typically with uPVC windows and doors) you will not get the required amount of warm air into it.

Connector 125mm, galvanised

Code: HSF18-059

The coupling joins two flue pipe sections of the same diameter into one continuous run. Diameter 125 mm, galvanised.

€3
incl. VAT
More than 5 pcs in stock
✓ Dispatched within 24 hours✓ 2 years warranty✓ Free advice
  • The heat output of the fireplace (fireplace insert) must always be sufficient for whether you will use it as the main heating or only as supplementary heating (background heat).
  • There must be an adequate air supply to the room from which the ducting runs and where the fire burns in the fireplace insert.
  • Except in the very simplest warm-air distribution systems (e.g. ducting air only to the upper floor), a fan of the required capacity must be fitted in the system.
  • All warm-air outlets must be closable and, where possible, continuously adjustable, so that you always heat only the spaces you want to heat.
  • If you blow air into a room, you must also make sure that the cooled air has a way to flow back out. Slight overpressure does no harm, but in a completely sealed room (typically with uPVC windows and doors) you will not get the required amount of warm air into it.

Drawings and dimensions

Downloads

Manufacturer

Parkanex

Frequently bought together