Description
The 200mm/160mm adaptor is part of our range of steel flue pipes designed for the exposed connection of solid-fuel heat sources (boilers, wood-burning stoves, tiled stoves and similar stoves) to the chimney.
Use
The adaptor is used to join flue pipe sections of different diameters (200 mm and 160 mm). It is intended for environments with no risk of explosion and no vapours of volatile substances (in accordance with ČSN 332003).
Important notice
The room in which the heat source is installed must have a supply of fresh air through gaps around windows and doors. If this is not the case, a sufficient supply of fresh air must be provided through an opening with a cross-section at least equal to the cross-section of the flue pipe used, increased by 10 %.
The adaptor is part of a wide range of steel flue pipes, including straight pipes, elbows, reducers and other components that make it easy to assemble the entire flue route.
Reducer 200mm/160mm/1,5mm - stove/chimney
The adaptor connects flue pipes of two different diameters, 200 mm to 160 mm, between the stove and the chimney; wall thickness 1.5 mm.










