Description
The adaptor is used to connect a flue pipe to a chimney or stove collar of a different diameter. Made from 1.5 mm sheet steel and finished in black Senotherm heat-resistant paint. Made in the Czech Republic and certified to EN 1856-2.
Use
The adaptor is intended for the exposed connection of solid-fuel heat sources (solid-fuel boilers, wood-burning stoves, tiled stoves and similar stoves) to a chimney, in environments with no risk of explosion and no volatile vapours present (in accordance with ČSN 332003).
Important notice
The room in which the heat source is installed must be supplied with fresh air through gaps around windows and doors. If this is not the case, a sufficient supply of fresh air must be provided to the room through an opening with a cross-section at least equal to that of the flue pipe used, increased by 10%.
Specifications
The adaptor is part of a wide range of steel flue pipes, including straight pipes, bends, cleaning pieces and other fittings, which make it quick and easy to assemble the complete flue route.
Adaptor 180mm/200mm/1,5mm - stove/chimney
The adaptor connects flue pipes of two different diameters, 180 mm to 200 mm, between the stove and the chimney; thickness 1.5 mm.










