Czech stove manufacturer
+420 491 422 647
BUYING GUIDE

Heat output calculator for stoves and inserts

In a minute you will know what heat output you need and see the models that suit your space. If you like, send the calculation to our technician — they will get back to you with a no-obligation quote.

1

What are you looking for?

A stove can stand anywhere by the chimney; an insert is built into a fireplace by a stove fitter.

2

Size of the heated space

The volume in m³ that the direct heat from the stove reaches — a room or connected spaces.

Air partwhere the direct heat from the stove reaches

Volume = floor area × ceiling height, e.g. 40 m² × 2.6 m = 104 m³. Count an open roof space or gallery at its full height.

3

House and climate

The HSF group calculation: how many m³ 1 kW heats depending on climate and insulation.

4

Style

RECOMMENDED OUTPUT
5 kW
Tolerance ±15%: 4.3–5.8 kW · volume 120 m³
Why is the output lower than the heat loss?

A house's heat loss is calculated for frost of around −15 °C, which is what the main boiler and radiators are sized for. But such frosts last only about a week a year; for most of the winter it is around zero and the house needs roughly half. We therefore size the stove for these prevailing conditions — it then runs at its nominal heat output all winter, where it works best, and in the hardest frosts the main heat source helps out.

SUITABLE MODELS

We will send the calculation to a technician, who will get back to you with a quote.

How to choose the right stove

Why not buy a more powerful stove “just to be safe”?

An oversized stove has to be throttled all the time. The wood then does not burn out completely, the glass and chimney get clogged with tar and the room overheats anyway. The ideal model has a nominal heat output equal to or slightly above the calculated need — and can be turned down.

Wood-burning stove or fireplace insert?

A stove is a ready-made appliance — place it by the chimney and you can be heating within a day. An insert is the heart of a fireplace, around which a stove fitter builds a surround. It takes more work, but the surround can store heat and distribute warm air through ducts to other rooms.

Air heating or water heating?

Air-heating stoves warm the space they stand in. Water-jacketed stoves have a heat exchanger and send most of the heat to radiators, underfloor heating or a heat-storage tank — they heat the whole house. The ratio of output to water and to air matters, so that the room with the stove does not overheat.

What is heat storage and when does it make sense?

Heat-storage (tiled) stoves heat up, store the heat in their mass and release it for hours after the fire has gone out. They suit well-insulated houses, where ordinary stoves quickly overheat, and give pleasant radiant heat.

What not to forget before buying

The diameter and condition of the chimney (a flue inspection is mandatory), a non-combustible base under the stove, clearances from combustible materials and, in new builds, an external combustion air supply. We will be happy to go through it with you — just send an enquiry from the calculator.

How accurate is the calculation?

We use the method the HSF group has used for years: based on climate and insulation we know how many m³ 1 kW will heat, and for a cottage with occasional heating we add a reserve. The result is deliberately lower than the heat loss of the house — we size the stove for the prevailing winter around zero, not for the few frosty days when the main heat source helps. Do you know the heat loss from your energy performance certificate? Put it in your message.

Want to start choosing straight away? Browse wood-burning stoves or fireplace inserts.