Heavy-gauge flue pipes in 2 mm sheet steel for a permanent connection between your stove and the chimney. Here you will find pipes in 25, 50 and 100 cm lengths, finned pipes, adjustable elbows, wall sleeves, rosettes, adaptors, connectors and complete sets.
The choice for anyone who wants a flue built for a long life and heavy use.
Thickness 2mm
68 products in this category.
Filters (active)
Price
3 € – 89 €
Part type
- stove-to-chimney adaptor24
- pipe16
- elbow12
- damper4
- rosette4
- connector4
- adaptor2
- set1
Show more (2)
- seal1
- wall sleeve0
Diameter
Angle

Ceramic Chimney Adaptor 150/150 mm Stove/Chimney

Connector 150mm/2mm 25cm

Reducer 180/150mm/2mm - Stove/Chimney
5.0 (2)
Chimney rosette 180mm

Chimney rosette 160mm
4.0 (1)
Ribbed Pipe 200mm/2mm 50cm

Adaptor 160/200mm/2mm - stove/chimney

Adapter 180/200mm/2mm - stove/chimney

Adaptor for ceramic chimney 160/180mm/2mm stove/chimney
5.0 (1)
Reducer 180/160mm/2mm - stove/chimney

Chimney rosette 200mm

Anti-Condensation Extension 180mm/2mm

Coupler 180mm/2mm 25cm

Adaptor 160/180mm/2mm - stove/chimney
4.0 (1)
Ceramic chimney adaptor 200/180mm/2mm stove/chimney

Ribbed Pipe 160mm/2mm 50cm

Connector 200mm/2mm 25cm

Connector 160mm/2mm 25cm

Anti-Condensation Extension 200mm/2mm

Stove-to-Chimney Adaptor BERTRAMS, Any Size
Why 2 mm thickness
Thicker material better withstands high temperatures and corrosion from flue gases, so the flue lasts considerably longer than thin-walled versions. We recommend it especially where the stove is used all season, where the flue runs through a visible part of the room and should look robust, or where you want to get the most out of the outgoing heat with finned pipes.
How to put your flue together
The starting point is the diameter of the stove outlet – we offer 150, 160, 180 and 200 mm. Depending on the distance between the stove and the chimney, choose a combination of pipes and an adjustable elbow, finish the chimney connection with a wall sleeve and cover the visible gap with a rosette. If the outlet or chimney opening size doesn't match, use adaptors, including made-to-measure adaptors for ceramic chimneys.
- Pipes and connectors for the flue route itself
- Adjustable elbows for changing direction without unnecessary joints
- Pipes with damper for draught control
- Anti-condensation sections where condensate could run back into the stove
- Mounting clamps and elbow seals for a solid, neat assembly
When you want it simple
For standard installations there are ready-made sets containing a pipe, elbow, wall sleeve and rosette in one delivery. They save time choosing and you can be sure the parts fit together. Before installation, check what diameter and connection method your chimney and inspection report specify.