Flue pipes connect your stove or fireplace insert to the chimney. Here you will find pipes, elbows, adaptors and reducers, wall sleeves, caps, as well as warm-air heat exchangers and finned pipes that make use of the heat in the outgoing flue gases.
The range is designed for stove owners and heating engineers putting together a flue system tailored to a specific installation.
Flue pipes
65 products in this category.
Filters (active)
Price
3 € – 145 €
Brand
- Parkanex64
- AMETALTOP1
- VAPK0
Part type
- stove-to-chimney adaptor24
- pipe17
- elbow12
- damper4
- connector4
- adaptor2
- set1
- seal1
Show more (6)
- reducer0
- rosette0
- T-piece0
- warm-air heat exchanger0
- cap / blanking plate0
- wall sleeve0
Diameter
- 120 mm0
- 120/130 mm0
- 120/150 mm0
- 120/160 mm0
- 125/130 mm0
- 125/150 mm0
- 130 mm0
- 130/120 mm0
Show more (26)
- 130/150 mm0
- 130/160 mm0
- 145/150 mm0
- 150 mm12
- 150/120 mm0
- 150/130 mm0
- 150/160 mm2
- 150/180 mm2
- 150/200 mm2
- 160 mm11
- 160/120 mm0
- 160/130 mm0
- 160/150 mm1
- 160/180 mm2
- 160/200 mm2
- 180 mm11
- 180/120 mm0
- 180/150 mm1
- 180/160 mm1
- 180/200 mm2
- 200 mm11
- 200/120 mm0
- 200/130 mm0
- 200/150 mm1
- 200/160 mm1
- 200/180 mm2
Angle

Pipe 160mm/2mm/50cm
5.0 (1)
Elbow - adjustable 90° 200mm/2mm
5.0 (3)
Ceramic chimney adapter 150/160mm/2mm stove/chimney
5.0 (2)
BERTRAMS seal for elbows UNI
4.9 (14)
Adapter for Ceramic Chimney 180/200mm/2mm Stove/Chimney
5.0 (1)
Flue pipe 180mm/2mm/25cm
5.0 (1)
Ribbed Pipe 150mm/2mm 50cm
5.0 (1)
Adjustable Flue Elbow 45° 160mm/2mm
5.0 (1)
Pipe 160mm/2mm/25cm
5.0 (2)
Ceramic Chimney Adaptor 160/200mm/2mm stove/chimney
4.5 (2)
Adapter for ceramic chimney 160/160mm/2mm stove/chimney
5.0 (2)
Adapter 150/160mm/2mm - Stove/Chimney
5.0 (1)
Flue Pipe Louvre 150mm/6/1,5mm

Damper 180mm/2mm

Pipe 200mm/2mm/25cm

Damper 200mm/2mm
5.0 (1)
Set 150mm/2mm with fixed elbow (Pipe, Elbow, Collar, Rosette)
5.0 (1)
Elbow - Adjustable 45° 200mm/2mm

Ribbed Pipe 180mm/2mm 50cm

Damper 160mm/2mm

Reducer 200/180mm/2mm - Stove/Chimney
5.0 (1)
Adapter 200/150mm/2mm - Stove/Chimney

Adapter 160/150mm/2mm - stove/chimney

Flue Pipe Reducer 200/160mm/2mm - Stove/Chimney
Sheet thickness: 1.5 mm or 2 mm
The range is divided into the subcategories 1.5 mm thickness and 2 mm thickness. Thicker material means a sturdier part with a longer service life; the thinner version is the usual choice for standard installations. Within one assembly it is best to stick to the same thickness so that all components fit together precisely.
What to base your choice on
The starting point is the diameter of the stove outlet and the diameter of the chimney inlet. These determine the pipes and any adaptor (reducer) you need – there is also a made-to-measure version and a reducer for ceramic chimneys with a rosette. A wall sleeve, single-walled or standard, covers the passage through the wall, and a cap (blanking plate) closes the cleaning opening.
- Pipes and adjustable 45° elbows for routing the flue
- Adaptors and reducers for connecting the stove to the chimney
- Wall sleeves, rosettes and caps for a neat finish at the wall passage
- Elbow seals for reliable joints
- Flue dampers for regulating the draught
How to get more heat from your flue
Warm-air heat exchangers and finned pipes increase the surface area that releases heat into the room, so less energy escapes up the chimney. They are most effective on longer vertical sections within the heated space.
Installation and maintenance
Route the flue pipe by the shortest path with as few bends as possible, rising towards the chimney, and fit the joints in the direction of the flue gas flow. Before assembly, check the lengths, the number of elbows and access to the inspection and cleaning opening. Always connect to the chimney in line with your chimney sweep's assessment. As a manufacturer of wood-burning stoves and fireplace inserts in Broumov, we supply parts you can rely on for the long term – honestly built and backed by a five-year warranty.